150 lines
6.9 KiB
OpenSCAD
150 lines
6.9 KiB
OpenSCAD
mode = "project"; // default
|
|
//mode = "parts";
|
|
//mode = "assembly";
|
|
|
|
thickness = 3.25; // 3.25mm = 1/8"
|
|
spacing = 3.25;
|
|
|
|
outer_width = 52*0.75;
|
|
outer_height = 52*3*0.75;
|
|
outer_depth = 52*1.333*0.75;
|
|
|
|
golden_ratio = 1.61803398875;
|
|
notch_size = golden_ratio*thickness;
|
|
notches_w = round((outer_width - 6*thickness) / (2*notch_size));
|
|
notches_h = round((outer_height - 6*thickness) / (2*notch_size));
|
|
notches_d = round((outer_depth - 6*thickness) / (2*notch_size));
|
|
|
|
module label(label_text) {
|
|
if (mode != "project") text(label_text, halign="center", valign="center");
|
|
}
|
|
|
|
// 2D notch pattern for an edge from [-width/2,0] to [width/2,0] in the XY plane with a +Y normal.
|
|
// Meant to be subtracted from the shape with difference().
|
|
module notches_neg(n, width, depth=thickness) {
|
|
// n notches + n-1 spaces
|
|
notch_width = width / (2*n - 1);
|
|
space_width = notch_width;
|
|
for (i = [0 : n-1]) {
|
|
translate([-width/2 + i*notch_width + i*space_width + notch_width/2, -depth/2, 0])
|
|
square([notch_width, depth], center=true);
|
|
}
|
|
}
|
|
|
|
// The inverse of notches_neg() for the same parameters, for the mating edge.
|
|
module notches_pos(n, width, depth=thickness) {
|
|
// n spaces + n-1 notches
|
|
space_width = width / (2*n - 1);
|
|
notch_width = space_width;
|
|
translate([-1e6/2 - width/2, -depth/2, 0]) square([1e6, depth], center=true);
|
|
for (i = [0 : n-1]) {
|
|
translate([-width/2 + (i+1)*space_width + i*notch_width + notch_width/2, -depth/2, 0])
|
|
square([notch_width, depth], center=true);
|
|
}
|
|
translate([10000/2 + width/2, -depth/2, 0]) square([10000, depth], center=true);
|
|
}
|
|
|
|
module top_side() {
|
|
difference() {
|
|
square([outer_width, outer_depth], center=true);
|
|
translate([0,outer_depth/2+0.005,0]) rotate([0,0,0]) notches_neg(notches_w, outer_width - 6*thickness);
|
|
translate([-outer_width/2-0.005,0,0]) rotate([0,0,90]) notches_neg(notches_d, outer_depth - 6*thickness);
|
|
translate([0,-outer_depth/2-0.005,0]) rotate([0,0,180]) notches_neg(notches_w, outer_width - 6*thickness);
|
|
translate([outer_width/2+0.005,0,0]) rotate([0,0,270]) notches_neg(notches_d, outer_depth - 6*thickness);
|
|
label("Top");
|
|
}
|
|
}
|
|
|
|
module bottom_side() {
|
|
difference() {
|
|
square([outer_width, outer_depth], center=true);
|
|
translate([0,outer_depth/2+0.005,0]) rotate([0,0,0]) notches_neg(notches_w, outer_width - 6*thickness);
|
|
translate([-outer_width/2-0.005,0,0]) rotate([0,0,90]) notches_neg(notches_d, outer_depth - 6*thickness);
|
|
translate([0,-outer_depth/2-0.005,0]) rotate([0,0,180]) notches_neg(notches_w, outer_width - 6*thickness);
|
|
translate([outer_width/2+0.005,0,0]) rotate([0,0,270]) notches_neg(notches_d, outer_depth - 6*thickness);
|
|
label("Bottom");
|
|
}
|
|
}
|
|
|
|
module left_side() {
|
|
difference() {
|
|
square([outer_height, outer_depth], center=true);
|
|
translate([0,outer_depth/2+0.005,0]) rotate([0,0,0]) notches_neg(notches_h, outer_height - 6*thickness);
|
|
translate([-outer_height/2-0.005,0,0]) rotate([0,0,90]) notches_pos(notches_d, outer_depth - 6*thickness);
|
|
translate([0,-outer_depth/2-0.005,0]) rotate([0,0,180]) notches_neg(notches_h, outer_height - 6*thickness);
|
|
translate([outer_height/2+0.005,0,0]) rotate([0,0,270]) notches_pos(notches_d, outer_depth - 6*thickness);
|
|
label("Left");
|
|
}
|
|
}
|
|
|
|
module right_side() {
|
|
difference() {
|
|
square([outer_height, outer_depth], center=true);
|
|
translate([0,outer_depth/2+0.005,0]) rotate([0,0,0]) notches_neg(notches_h, outer_height - 6*thickness);
|
|
translate([-outer_height/2-0.005,0,0]) rotate([0,0,90]) notches_pos(notches_d, outer_depth - 6*thickness);
|
|
translate([0,-outer_depth/2-0.005,0]) rotate([0,0,180]) notches_neg(notches_h, outer_height - 6*thickness);
|
|
translate([outer_height/2+0.005,0,0]) rotate([0,0,270]) notches_pos(notches_d, outer_depth - 6*thickness);
|
|
label("Right");
|
|
}
|
|
}
|
|
|
|
module front_side() {
|
|
difference() {
|
|
square([outer_width, outer_height], center=true);
|
|
translate([0,outer_height/2+0.005,0]) rotate([0,0,0]) notches_pos(notches_w, outer_width - 6*thickness);
|
|
translate([-outer_width/2-0.005,0,0]) rotate([0,0,90]) notches_pos(notches_h, outer_height - 6*thickness);
|
|
translate([0,-outer_height/2-0.005,0]) rotate([0,0,180]) notches_pos(notches_w, outer_width - 6*thickness);
|
|
translate([outer_width/2+0.005,0,0]) rotate([0,0,270]) notches_pos(notches_h, outer_height - 6*thickness);
|
|
label("Front");
|
|
}
|
|
}
|
|
|
|
module back_side() {
|
|
difference() {
|
|
square([outer_width, outer_height], center=true);
|
|
translate([0,outer_height/2+0.005,0]) rotate([0,0,0]) notches_pos(notches_w, outer_width - 6*thickness);
|
|
translate([-outer_width/2-0.005,0,0]) rotate([0,0,90]) notches_pos(notches_h, outer_height - 6*thickness);
|
|
translate([0,-outer_height/2-0.005,0]) rotate([0,0,180]) notches_pos(notches_w, outer_width - 6*thickness);
|
|
translate([outer_width/2+0.005,0,0]) rotate([0,0,270]) notches_pos(notches_h, outer_height - 6*thickness);
|
|
label("Back");
|
|
}
|
|
}
|
|
|
|
module thicken() {
|
|
linear_extrude(height=thickness, center=true, convexity=10) children();
|
|
}
|
|
|
|
module std_part_layout() {
|
|
translate([0,0,0]) top_side();
|
|
translate([-(outer_width/2 + outer_height/2 + spacing), 0, 0]) left_side();
|
|
translate([ (outer_width/2 + outer_height/2 + spacing), 0, 0]) right_side();
|
|
translate([0, -(outer_depth/2 + outer_height/2 + spacing), 0]) front_side();
|
|
translate([0, (outer_depth/2 + outer_height/2 + spacing), 0]) back_side();
|
|
translate([0, -(outer_depth + outer_height + 2*spacing), 0]) bottom_side();
|
|
}
|
|
|
|
module part_layout() {
|
|
translate([-2*(outer_depth/2 + outer_width/2 + spacing), 0, 0]) back_side();
|
|
translate([-1*(outer_depth/2 + outer_width/2 + spacing), 0, 0]) rotate([0,0,90]) left_side();
|
|
front_side();
|
|
translate([outer_depth/2 + outer_width/2 + spacing, 0, 0]) rotate([0,0,90]) right_side();
|
|
translate([outer_depth + outer_width + 2*spacing,(outer_height-outer_depth)/2,0]) top_side();
|
|
translate([outer_depth + outer_width + 2*spacing,-(outer_height-outer_depth)/2,0]) bottom_side();
|
|
}
|
|
|
|
module part_assembly() {
|
|
color("red") translate([0,0, outer_height/2 - thickness/2]) rotate([0,0,0]) thicken() top_side();
|
|
color("green") translate([0,0,-outer_height/2 + thickness/2]) rotate([180,0,0]) thicken() bottom_side();
|
|
color("blue") translate([-outer_width/2 + thickness/2,0,0]) rotate([0,-90,0]) thicken() left_side();
|
|
color("cyan") translate([ outer_width/2 - thickness/2,0,0]) rotate([0, 90,0]) thicken() right_side();
|
|
color("magenta") translate([0,-outer_depth/2 + thickness/2,0]) rotate([ 90,0,0]) thicken() front_side();
|
|
color("yellow") translate([0, outer_depth/2 - thickness/2,0]) rotate([-90,0,0]) thicken() back_side();
|
|
}
|
|
|
|
if (mode == "project")
|
|
part_layout();
|
|
else if (mode == "parts")
|
|
thicken() part_layout();
|
|
else
|
|
part_assembly();
|